It is for the customer to achieve the best jamming range of cell phonejammer

Shell reinforced / foam to suppress, to prevent loose; be sure to do the design for reference in accordance with the Female size as a reference to the public seat size, Female buckle around the device with the public, Block interference occurs. FPC bending number of times required to reach 100K. (2) the features without rounded corners for 1MM. According to the hardware requirements to determine the adequacy of the pin number. pin angle of the order is correct; audits. Determine the height of the thickness of the space, according to the width of the space to select the PIN spacing; fpc and deck junction width, thickness and pin corner shape design spec requirements; careful consideration on the exposure or under exposure. FPC gold finger is inserted into the zif exposed segment can not be directly bent have a buffer segment, or FPC Goldfinger root fracture, conduction problems.  cell phone jammer  can be debugged by the skilled working personnel of the manufacturer.
ZIF is under contact, pay attention to the FPC exposed segments do not up the discount, otherwise the poor contact. ZIF is on the contact mode and vice versa. Shell reinforced / foam to suppress, to prevent loose; FPC bending number of times required to reach 100K. (2) the features without rounded corners for 1MM. FPC stiffening plate thickness is 0.15mm or 0.2mm, select the appropriate zif. The FPC Goldfinger reinforcement plate width which includes two sections: the inserted the zif segment and exposed bending reinforcement segment. FPC exposed bending reinforcement segment bending, and in the painting FPC bending shape can not just draw size, require a combination of specifications to be bending position. For the discount to the backside of the PCB connection of LCM FPC. The shielding frequency to be shielded by cell phone jammer should be commissioned by the supplier.
Pay attention to the bending region can not touch the PCB body, to prevent the FPC injured when to do life testing, the distance of about 0.5mm PCB cut to avoid, as appropriate slot. CAMERA positioning, surrounded by positioning reinforcement to avoid interference with fpc; buffer foam selection and CAMERA tightness, in order to ensure the adoption of the dust test; preload foam thickness of at least 0.2mm. FoV camera 3D painting, shell holes and the LENS screen printing to ensure the not shelter CAMERA perspective; camera the LENS printed, pay attention to foolproof. In advance with the client asked to clear the need for screen printing text. If the appearance of the shell of the camera location is relatively weak, easily pressed down, the longer ribs on the shell to withstand the camera. The information concerning cell phone jammer  is provided by the supplier.
Around the board or deck, to prevent the camera's sensor crushed soft pressure test. This protection principles and LCM is the same. Attention to the assembly after the shell pressure to the camera, shell do need appropriate given way, such as C-angle 0.3mm. Note camera B2B in accordance with female reference size reference dimensions to the public seat, Female buckle interfere with the public seat around the device. For fpccamera to need to be considered in the structural design of the FPC in the practical work of state and regional and angle of the bend. Shielded metal isolation between the two regions of space in order to control the electric and magnetic fields and electromagnetic induction and radiation from one region to another region. The customization of  phone jammer    asks for more information.